ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
hi all, just in the middle of a full house refurb and trying to get my cabling right! If I have a Beogram connected to my moment, can I then share the output with the other multi room speakers across the house?
Beovision 10, Beoplay V1, Beolab 17, Beolab 9, Beolab 4, Beosound 2, Beosound Moment x 2, Beoplay M3, Beogram 1700
Yes, indeed you can!
MM
There is a tv - and there is a BV
Hi,
Yes, if the Beogram is a later model with a built in phono pre-amp, then you just need this cable to connect it to the Aux input of the Moment:-
https://soundsheavenly.com/beogram-record-players/beogram-to-non-bo-device-phono-pre-amp-receiver-amplifier-etc
If the Beogram doesn’t have a pre-amp, you will need this pre-amp kit instead, which comes with all cables needed and full instructions, ready to “plug and play”:-
https://soundsheavenly.com/beogram-record-players/pre-amp-bundle-for-bo-beogram-and-all-turntables – please choose the “Twin RCA plugs” output option for your Moment.
If you are unsure about whether the Beogram has a built-in pre-amp, please let me know the full model number and I will be pleased to confirm this.
Kind regards, Steve.
Steve.
www.soundsheavenly.com
Founder of Sounds Heavenly Cables and Brand Ambassador for Bang & Olufsen
Sounds Heavenly are proud to sponsor BeoWorld!
Please check out my YouTube channel at https://youtube.com/soundsheavenlycables
Thank you both! Just ordered some longer cables actually Steve! As soon as I pick a beogram up I’ll be in touch for what I need.
Thanks James!
The cables are ready to post in the morning, please ask if you need any further help.