ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Anybody point me in the direction of where the wires are soldered in the DIN plug? Dying to see if a resoldered plug solves my issues. thanks
https://www.beoworld.org/beotech/index.htm
https://www.beoworld.org/beotech/misc1.htm
I looked at this but colours don’t match the colours in my cable. I have red white yellow blue black brown and a ground ???
Hello,
only the standard cables MASTERLINK (8-pin) and DATALINK (7-pin) are described on the BEOTECH side!
The beogram connection cable is somewhat differentiated
please have a look at the thread
https://archivedforum2.beoworld.org/forums/p/39007/297772.aspx#297772
there I described the connector of the Beogram
the thread is partly in german, but google is a good friend here (translator)!
wilfried
I took the DIN from the cd apart and copied wiring - bingo, worked a treat. thanks for taking the time to help reply. derek.