Alarms on play products - Touch to join function?

Hi guys,

I have a house full of BeoSound/BeoPlay products (BS1, BS2, Stage, Shape, A9, M5, M3) and i usually use alarm to my Shape in my living room, M5 in the bathroom and stage in the walkin etc. 

I have set all the alarms to start on a specific radio station at 08.00, but none of the speakers plays the same, they all have different delays (1-2 seconds from eachother) i guess that's because of the buffer time on each product. (Their all cabled to the internet). 

So i recently just used my Shape as an alarm and none of the others..

 

My question is; Is it possible to fix this delay?

 

Another question: Why isn't there an alarm function called "touch to join" so i can start up my radio stations and let the other touch to join or something like that?
Example; Spotify connect on a product, and let the users join so i get the multiroom effect. 

Jensm1996:

My question is; Is it possible to fix this delay?

Another question: Why isn't there an alarm function called "touch to join" so i can start up my radio stations and let the other touch to join or something like that?

Example; Spotify connect on a product, and let the users join so i get the multiroom effect.

Only a multiroom feature can ensure proper synchronisation between devices. Unfortunately B&O does not have a group concept where you could program an alarm on one device and join others to it programmatically.

Not sure I understand the second question, but in my case I have an alarm set in my bedroom on a particular radio and I touch to join my other products as I walk in the room they are located into. Spotify cannot participate to a Beolink multiroom, all other music sources can (TuneIn, Deezer, DLNA,

Airplay or any source attached to a product line In assuming you have preserved the line in delay)

mbolo01:

Unfortunately B&O does not have a group concept where you could program an alarm on one device and join others to it programmatically.

A Beolink Gateway or Beoliving can be programmed to JOIN after starting another device.

But adding the JOIN command to the Alarms would be a nice feature.

Carolpa:

mbolo01:

Unfortunately B&O does not have a group concept where you could program an alarm on one device and join others to it programmatically.

A Beolink Gateway or Beoliving can be programmed to JOIN after starting another device.

But adding the JOIN command to the Alarms would be a nice feature.

Hi

What's the command to 'JOIN' in BeoLink Gateway?

Cheers,

   Urs.

-

-

Yes, same here. M3 stars on radio, walk into kitchen and touch M5 to join.

Selecting other rooms for alarms is a Sonos feature and would be great if B&O implemented it too.