Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beomaster 1000 + Beogram 4004 Pin question

rated by 0 users
This post has 2 Replies | 1 Follower

Writeleandro
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
Writeleandro Posted: Tue, Nov 17 2020 4:59 AM

Hi all, I've enjoyed my Beomaster 1000 for a few years and today bought a Beogram 4004 tt to go with it...only to find out the tt has a 7 pin connector and the beomaster a 5 pin input. Is there an adapter that would solve that problem? Ty

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Tue, Nov 17 2020 8:32 AM

On most (but not all) Beograms and Beocords with a 7-pin DIN plug at the signal cable, the two outer pins (6 & 7) can be unscrewed from the plug using a very small (watchmakers) screwdriver.
Keep the pins in a safe place - you will need them when you replace your Beomaster 1000 with a Beomaster 2400-2 and want to remote control the Beogram.

Martin

Writeleandro
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
Writeleandro replied on Tue, Nov 17 2020 4:43 PM

Thank you! It worked!!

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly