ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I need to make up some SpeakerLink cables. I know about the 4 pin DIN plugs that are required but can anyone point me to a suitable 4 core screened cable ?
Alternatively, 3 core with screen would be OK too.
I guess this would be a stranded multi-core cable but I like to know the size of the cables (in mm)
Use multicable 6 wire with one wire screened.Cable should be 0.5-0.75 mm for each wire, 0.2 mm for data..See link below:http://beotech.beoworld.org/wiring1.htmhttp://beotech.beoworld.org/wiring2.htm
Thanks very much for the information.
I have beenable to find a cable specification from the BeoInfo site. The wiring referred to is as mentioned in the links previously shown..
A possible cable is a hybrid power and signal cable such as, for example, Van Damme Ambicore. Clearly there are other manufacturers.