Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Preamp for Beolab

rated by 0 users
This post has 5 Replies | 1 Follower

Silou
Top 200 Contributor
Switzerland
Posts 465
OFFLINE
Bronze Member
Reply
Silou Posted: Thu, Jan 21 2021 7:48 PM

Hi,

Which brand does a preamplifier or better A/V preamp with trigger output for connecting Beolab ?

 

Thanks

 

 

 

Carsten
Not Ranked
Copenhagen, Denmark
Posts 44
OFFLINE
Bronze Member
Reply
Carsten replied on Thu, Jan 21 2021 8:28 PM

Try to look at Yamaha WXC-50. 

Silou
Top 200 Contributor
Switzerland
Posts 465
OFFLINE
Bronze Member
Reply
Silou replied on Sat, Jan 23 2021 9:08 AM

Carsten:

Try to look at Yamaha WXC-50. 

Fine good idea for audio. 

And any idea for AV ?

crossbytje
Top 500 Contributor
Posts 224
OFFLINE
Bronze Member
Reply
crossbytje replied on Sat, Jan 23 2021 9:36 AM

I'm using a Marantz AVR with preouts. It has a 12V trigger, but you can find cables with integrated downgrade to 5V trigger signal for BeoLabs.

 

Beolit 12 - Beolab 4 pc (dead now) - Beoplay H5 - Beolab 9 - BeoRemote One BT - Beoplay M3

Ravsted
Top 200 Contributor
Denmark
Posts 345
OFFLINE
Bronze Member
Reply
Ravsted replied on Sat, Jan 23 2021 2:02 PM

I did it this way.

https://archivedforum2.beoworld.org/forums/t/45510.aspx

Guess there are many receivers like the Harman Kardon with a 230v socket turning on/off with the amp. Simply plug in a good quality usb charger and you'll have a 5V trigger.

 

Silou
Top 200 Contributor
Switzerland
Posts 465
OFFLINE
Bronze Member
Reply
Silou replied on Sat, Jan 23 2021 2:25 PM

Thanks for your input !

If found this thread:

https://archivedforum2.beoworld.org/forums/p/42873/311423.aspx

about Canton Smart Connect 5.1! It seems a very good products ! Need to DIY to get trigger output.

 

 

 

Page 1 of 1 (6 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly