ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I have been searching the web for these speaker stands to no avail. Also, the nearest country where I might find them is the USA but there hasn't been anything lately.
So, I think I can make myself a pair but haven't found any image, drawing or file with dimentions or instructions for their assembly. Does someone here have available this information? Or maybe own the stands.
If shared it will be greatly appreciated.
Regiomexhttps
Here goes:
How to make your own speaker stand
Cut to size
Weld all 4 corners, adjust 90 degree angle
Adjust inclination of upright to +- 3 degree, grind, paint
Finished with brass bushes and adjustment screw.
1/2" x 1" 18 gauge Steel USD 8.00
1 can Hammered spray paint USD 8.50 (used 1/3 for 2 stands)
Screws and odd pieces found in my workshop.
Collecting Vintage B&O is not a hobby, its a lifestyle.
Yes Søren, but these won't fit Redline speakers.
Martin
Thank you so much Søren.
Very much appreciated. I also found this exact design in the web, but it is the design for the older S45 speakers, not the RL 60.2 speakers. The stands are like the ones in this website: https://images.app.goo.gl/T9Hyhz9HC31hEt249. (I'm newby and still haven't found the way to upload images from my computer). Thanks any way.
I have some 6018s but they are in my mother in law's attic (with my 60.2s) and I can't visit due to lockdown! Perhaps later in the year ...
Hopefully someone else will be able to help.
Hey,
That's good news. How unfortunatelly it is for all this COVID thing.
Norberto
Norberto: Thank you so much Søren. Very much appreciated. I also found this exact design in the web, but it is the design for the older S45 speakers, not the RL 60.2 speakers. The stands are like the ones in this website: https://images.app.goo.gl/T9Hyhz9HC31hEt249. (I'm newby and still haven't found the way to upload images from my computer). Thanks any way.
Sorry didnt read properly, didnt see the RL
I do have the stands for the Rl 7000 and the redline 140. The Designs were pretty different, but you can get an idea how these stands look.
do you want some pictures?
Sure! Appreciated.
Do they look like this: https://images.app.goo.gl/MzqSt5qYWNw7fT7f6?
Different stands (but for same speakers), but I was quite surprised how much these ones went for! Nice to see them in the original box though.
https://www.ebay.co.uk/itm/Bang-and-Olufsen-B-amp-O-Red-Line-RL-Floor-Speaker-Stands-/324438803270?_trksid=p2047675.l2557&ssPageName=STRK%3AMEBIDX%3AIT&nma=true&si=TdZdyggCntzzj9z3Fs5gsY2OmP0%253D&orig_cvip=true&nordt=true&rt=nc
Hi, everyone
I would love to get drawings and measurements for the RL 45/60 speaker stands. If anyone has them, could you kindly post a link or upload the file?
Here are my drawings for the RL 140s, which are bigger. Hope they are of use to someone.
B&O Redline 140 Speaker Drawings 1.pdf
Thanks