ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi all
I have a malfunction in my BL3500.
The speaker does not espond to signals from my Beo4 (option Link room)
the timer and mute function works fine directly on the speaker.
My frind will try to trouble shoot the IR pcb but we have no diagram - do you?
Let me know if anybody can help?
Thanks in advance
Try turning the power off for a while then try it again is always worth a try first.
Yah - This advice have in many situations helped me out - But in this case not.
Thanks anyway
Common fault. Remove display and parts fitted in the plastc holder. Remove holder and clean pcb and Repair probably some broken traces.
Thanks Beobuddy
I do have a friend in "backoffice" WHO knows his electronics - I will ask him, to follow your advice.
Thanks in advice
//
I think I have a similar problem.
My Beolab 3500 suddenly have problems receiving commands from my remote.
Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Homeoffice: M3, Beocom 2 Library: Beosound Emerge, Beocom 6000 Bedroom: M5, Essence remote Travel: Beoplay E8 2.0, Beoplay EQ, Beoplay Earset
Hiort: I think I have a similar problem. My Beolab 3500 suddenly have problems receiving commands from my remote. I have ruled out the remote as source of the problem, since it works well with my other equipment. If I try to press the volume control on the remote many many times very close to the BL3500, I may get the volume to move one step or two. Was it an easy task to fix this problem? /C
Anyone?
Is it possible to fix problem with the IR receiver as a "do it your selves" exercise?
if yet aktuell. I ca repair the IR funktion for IR Dimmer, Beolab 3500 and 9000