Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beocenter 9500 & equalizer or another use of the in/out

rated by 0 users
This post has 2 Replies | 1 Follower

Limbabnees
Not Ranked
Posts 21
OFFLINE
Bronze Member
Reply
Limbabnees Posted: Sun, May 12 2013 8:40 PM

How connect and use an equalizer on the Beocenter 9500.

Guy
Top 50 Contributor
Warwickshire
Posts 2,590
OFFLINE
Gold Member
Reply
Guy replied on Sun, May 12 2013 8:44 PM

Welcome to the forum!

You'll need a special connection to the DIN LINE IN/OUT socket just above the POWERLINK 1 socket on the rear connections panel.  Normally the IN/OUT connections are bridged with the plug that is usually inserted.

EDIT:  Checked the service manual and I think pins 4 and 1 are R and L out respectively, whereas pins 5 and 3 and R and L in.  Pin 2 is ground.

Can't think why you'd need an equalizer though!

Limbabnees
Not Ranked
Posts 21
OFFLINE
Bronze Member
Reply
Limbabnees replied on Sun, May 12 2013 10:30 PM

Thanks.

I thought so, but wasn't sure.

Dont need an equalizer, but i have a Missing Link Musical Fidelity (Tube).

Just want to check how it will sounds.

 

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly