ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Kon het niet laten om mijn "klassieke" AV9000 weer eens aan te sluiten op een van mijn masterpanels MPAV 9000. Voor zover ik me kon herinneren gaf het display van de masterpanel alle info weer, maar helaas, nu niet meer. Alle functies op de keyboard zijn te bedienen maar het display geeft niets weer, alleen de rode en groene led licht op. Als ik de masterpanel in testmode zet (standby ingedrukt, spanning erop) dan verschijnt alle info op het display. Ik kon me herinneren dat de masterlink kabel een speciale kabel is voor de AV9000/MPAV 9000. Zou dat de reden kunnen zijn van het niet oplichten van het display door gebruik van een standaard ML kabel? Hoe speciaal is deze kabel? Misschien "full wired" of is er nog iets anders aan deze kabel? Beide masterpanels geven trouwens hetzefde resultaat.
Brengen & Ophalen
Hi Leslie
please allow to answer in english as I do not write netherlandish.
I have a Masterpanel connected to my AV9000 with a splitted ML-Cable, How it is connected:
AV9000 -> White connector with white cable -> junction-box -> black cable with black connector -> MPAV
in the junction box all wires are connected according to their colour.
Gr - Gr ; W/Gr - W/Gr ; Or - Or ; W/Or - W/Or ; R - R ; W/R - W/R ; Bu - Bu ; W/Bu - W/Bu ;
shield of white cable on first pin of J-box and shield of black cable on the last pin of the J-box
!!! on pink field of J-box : Grey - Grey !!! I do not know if this is of any importance.
!!!!!!!!!!! On the white cable connected on the AV9000 pink and black wire are connected together !!!!!!!!!!!! I do not know why.
I bought my MPAV on ebay and it came with this cable.
When I first connected the MPAV to AV9000 it wasn't working I had to change some Option settings on my AV9000, but I can't remember which one. I think it had to do something with master and slave, I think AV9000 has always to be set to master, but I really can't remembre.
regards
gerard
P.S.: My AV9000 Monitor went dead last week and I opened a Threat in the workbench forum, do you have any advice for me?
Thanks'
Thanks Gerard, will try the ML junction box alternative although I prefer to have a non modified ML cable. I had one once but I gave it away :-(
Wish I had read your post before regarding your AV9000 monitor. Brought one to the local dumpyard last week.
Try to contact Ipaul (member), he fixed mine and is the expert on fixing tube TV's. If you need parts I might have some for you (MX7000), or maybe Ipaul has.
I do not know if mine is realy modified or only joined (junctionboxed) did you try different option settings? If you tell me how to do it, I may look at the settings of my AV9000 and MPAV. I'm totaly new to all this masterlinking stuff.
I don't think there are any option settings to change for the masterlink cable.
the option settings where not for the masterlink but for the MPAV and the AV9000
Edit: And thank you for suggesting to contact ipaul, he came to read my workbench threat.
Wat is het serienummer van het Masterpanel?
MPAV 9000 is from 1992 - TYPE NO: 2621 - S.W. 1.1 - SERIAL NO: 09903440 (SW. 1.1 is written on a sticker, maybe the SoftWare was updated)
AV9000 Monitor (BeoVision 9000) is from MCMXCII (also 1992) - TYPE: 43/01 MDT - SW 1.1 - SERIAL NO: 10218992
Today I got a new ML-Cable bought on ebay , this cable has no special specification, I tested it with my MPAV and BeoVision 9000, everything seems to work fine. There seems not to be any need of a special ML-cable
EDIT: Sorry I did not pay attention to whom was posting the above message. Welcome Blackrix in our discussion. The Serial-NO i wrote is of a working setup and not of the problem setup from Leslie
Blackrix: Wat is het serienummer van het Masterpanel?
Leslie: Blackrix: Wat is het serienummer van het Masterpanel? Blackrix, vraag je dat aan mij of aan Gerard?
De jouwe, aan de hand van het serienummer is namelijk te achterhalen of er een modificatie in het masterpanel nodig is.
10469325 S\W 1.1
Is het misschien dat beruchte linkje op de ML connector die 'm geschikt maakt voor andere ML apparaten?
Leslie:That's weird, my Masterpanel has typenumber 2623 (1992)
Product details on BeoWorld say:
Types:
ERD 2623 (1992 - Aug 1996)EUR 2621 (1992 - Feb 1996)GBR 2622 (1992 - April 1994)GRD 2624 (1992 - Sept 1995)
Er moet in dat geval in het masterpanel een verbinding worden gemaakt tussen pen 4 en pen 12 van de masterlinkconnector als een 9-polige masterlinkkabel wordt gebruikt. De originele masterlinkkabel die werd gebruikt bij de AV9000 was volledig bedraad, voor de latere masterlinkproducten was 9-polig voldoende. De modificatie kan niet extern in de kabel worden gedaan, het zal in het masterpanel moeten worden gedaan.