ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi, I was offered a Mk III DVD RF Avant, but was concerned about something.
On the left side of the screen, there is a 3 mm gap (vertically) where the picture does not meet the black border of the screen (a 3 mm greyish strip).
Is this a simple adjustment, or something worse?
Just wondering if anyone had the same issue or may know what the problem is.
Thank you very much.
That sounds like under-scanning of the picture tube. It can usually be corrected in the service menu with the horizontal phase and amplitude controls
Ron
Thank you very much Ron. Can I please ask how you access the service menu?
There are some very critical adjustments in the service menu and access to it is retricted.
Try and get a B&O engineer to do it, as much damage can be done if you don't have the test gear to do the adjustment properly.
Thank you Ron. Much appreciated. Enjoy your weekend.