Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

beomaster 5000: noise in loudspeaker when shut off

rated by 0 users
This post has 1 Reply | 1 Follower

tiwang
Not Ranked
Denmark
Posts 9
OFFLINE
Bronze Member
Reply
tiwang Posted: Mon, Sep 9 2013 9:09 PM

hi out there

I have a old beomaster 5000 (the first computer controlled version - Square with alu) - when it is shut off there is still some idle noise in the loudspeakers from some current leak - some ideas for from where that leak can come?

 

best regards /ti

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Mon, Sep 9 2013 10:10 PM

Off with the bottom plate and check the solder joints on the power supply relais.
If the relay coil is never energized, the amplifiers are always powered (not good for your electric bill).

Martin

Page 1 of 1 (2 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly