ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
First off, thanks to the admins for the add. I've looked at this forum quite a bit before joining. It was useful for me for several projects. But now I have one that has me looking for advice on where to find parts, and technique. I have a pair of ms150 speakers. I have rebuilt the crossovers, refoamed the mid woofer, and rebuilt the 3" midrange dome, but the 10" woofer, welll, one refoamed up just fine. But the other had a severely warped cone that prevented the refoam from succeeding.
So, I need to recone both (so they match) and then I will refoam again. But I don't know where to find the cones, and I have not reconed a driver before, but it can't be that tough... Any advice is greatly appreciated.
Speakers in question...
https
I had mine done professionally at Recone lab unfortunately now not there but did later have a M100 bass unit seize up and used Wlmslow Audio whom I sent the drive unit to and it was returned in perfect working order.
https://www.wilmslowaudio.co.uk/
Peter