ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi
I have a problem!! Today I, for some reason, configured my Beosound 9000 in A.OPT 1, and after that I cannot link video to my linkrooms anymore!??
I have a Beovision 4-65 with Beosystem 3 in my TV-room as masterunit (2nd floor), MX4002 in bedroom (2nd floor), Beosound 9000 in livingroom (1st floor) and Beocenter 6 in kitschen (1st floor).
I have STB box in AV1 and AV2 and Playstation3 in AV3. Never changed these and has always worked fine. In kitchen and bedroom I could see both STB boxes without problem before, but now I have no picture and no sound from these boxes anymore. :-(
I can listen to radio and CD all over the house, so I guess there are no problems with the Masterlink cables.
I have option 2 on my Beosystem3 and option 6 in kitchen and bedroom, but no picture and sound anymore???
Any out there that could help me reconfigure my system, so it works as before again?
Could it be something with V.OPT, A.OPT or L.OPT..
Please, I go crazy........
Joacim
Strange...
Do you have an RF link amplifier installed? Does it work?
V.OPT2 for BS3 (videomaster), V.OPT6 for MX4002, A.OPT2 for BS9000 (audiomaster, Beolabs connected?), V.OPT6 for BC6 should work.
Be careful with option settings. Watch the standby lights blinking while you program the setting, and avoid receiving ir commands by multiple devices.
Hope this helps.
Stefan
Some times powering off (and on) the system component (especially the BSys3) helps communicating the new option settings.
MM
There is a tv - and there is a BV