Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beovision 7 - Centres and Rears?

rated by 0 users
This post has 4 Replies | 1 Follower

jleckenby
Not Ranked
Posts 22
OFFLINE
Bronze Member
Reply
jleckenby Posted: Sat, Mar 22 2014 7:53 PM

Hi All,

I currently have a Beovision 7 with a BeoLab 7.1. I was considering getting some Beolab 6000's to use as rears, but the setup greys out setting the rears until you have set the fronts. Seems to loose some detail to when you set any front. Is it possible to use only beolab 7.1 and rears?

Secondlife
Top 500 Contributor
Posts 145
OFFLINE
Bronze Member
Reply
Secondlife replied on Sat, Mar 22 2014 8:08 PM
Only if you select them as front and place them physically in the rear.
Millemissen
Top 10 Contributor
Flensborg, Denmark
Posts 14,680
OFFLINE
Gold Member
Reply
Millemissen replied on Sat, Mar 22 2014 9:56 PM

Hi jleckenby!

sorry for asking - but why whould you want to do that?

MM

There is a tv - and there is a BV

robaer
Not Ranked
Posts 23
OFFLINE
Bronze Member
Reply
robaer replied on Sat, Mar 22 2014 11:16 PM

Perhaps he prefers the sound of the 7.1 as fronts and would have better use of the 6000s if used as rear speakers. This would make a nice little surround sound system.

Millemissen
Top 10 Contributor
Flensborg, Denmark
Posts 14,680
OFFLINE
Gold Member
Reply
Millemissen replied on Sun, Mar 23 2014 8:24 AM

Choosing 'Speaker 5' (i order to have the rears active) means making a center channel from the 7.1.

They can't be frontspeakers - and without fronts you can't speak of 'surround sound'.

MM

There is a tv - and there is a BV

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly