Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beo Lab 9 gone into protection mode and not playing

rated by 0 users
This post has 1 Reply | 2 Followers

theback9
Not Ranked
Posts 1
OFFLINE
Bronze Member
Reply
theback9 Posted: Sun, Apr 27 2014 7:52 AM

Hello, my very carefully used Beo Lab 9s went into protection mode (only one speaker) and despite unplugging the speaker it remains in the yellow light mode. At one point the red light came back on but when I played music it went to green and then quickly back to yellow. The speakers are still under warranty but I have moved to India on work (from London) and I can't seem to find an authorised dealer here.

Any suggestions on what could be wrong will be very helpful.

Thanks in advance.

 

StUrrock
Top 100 Contributor
Posts 995
OFFLINE
Bronze Member
Reply
StUrrock replied on Sun, Apr 27 2014 12:24 PM
theback9:

Hello, my very carefully used Beo Lab 9s went into protection mode (only one speaker) and despite unplugging the speaker it remains in the yellow light mode. At one point the red light came back on but when I played music it went to green and then quickly back to yellow. The speakers are still under warranty but I have moved to India on work (from London) and I can't seem to find an authorised dealer here.

Any suggestions on what could be wrong will be very helpful.

Thanks in advance.

try taking out the power for a longer period of time this normally resets the speaker unless there is a fault of course
Page 1 of 1 (2 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly