ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
So, ich hab mir nun, da ja das anschließen eines ATV2, ein ATV1 gekauft.
Mit einem Kabel das von Composite (ich glaub so heißen die Ausgänge am ATV) auf Scart und angesteckt.
Nichts, kein Bild und Ton.
Hab mal am anderen Anschluß wo der Sat hängt probiert, auch nichts.
Muß ich da irgendwas noch anders einstellen oder brauch ich da doch ein anderes Kabel?
fragende Grüße, Newbie
Beovision 12-65 NG, Beosystem 4, Beolab 7.2, Beolab 6000, Beolab 5, Beolab 4000, Playmaker, Beogram 5005, Beo4, Beo5, Beovision 7-32 MK3 (2x), Beovision 4.42, Beosystem 2 HD, Beolab 7.1, Beolab 7.4, Beovision 10-32, Beovision 6-26, Beosound Moment, Beosound 2300, Beosound Ouverture, Beogram TX2, Beogram 2404, Beomaster 3002, Beovox CX 75, Beovox CX 100, ibundo, Keyring.......
Hallo,
Composite ist nicht gleich Scart, dieses Kabel geht nur wenn der TV dieses Signal auch am Scart unterstützt. Ist aber meines Wissens am BS2 nicht so. Nur FBAS, SVHS und RGB.
braucht also auch hier ein Konverter
Gruss
Composite ist normalerweise ein gelber Ausgang btw ein gelber Stecker.
Und den hat der ATV1 nicht!
Da hilft nur ein Konverter von HDMI oder Component (Rot/Blay/Grün) auf Scart.
Oder (besser) so ein Ding: http://www.amazon.de/gp/product/B0002W6942
Der Ton geht natürlich extra (Rot/Weiss).
MM
There is a tv - and there is a BV