ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Chang in Configuration Tool version 6.84 :
Features:
- Added BeoVision Avant support:
* Deezer source
* 3 new stands
* Netradio
- Added Deezer source to BeoVision 11, BeoSystem 4 and BeoPlay V1 products.
- Added IRA 8 to IRA list.
- Removed auto-incrementation of sources.
- Removed AV button from zone page on TVs that use Beo5 IR protocol, since they don't support it.
- Added Get HD PVR STB to Configuration Tool.
- Hid the BLC in zones which don't contain it. It's shown only in the zone where BLC is used.
- Disabled drag and drop for hard keys.
- Fixed the bug that caused third party IR to be disabled in certain setup.
- Removed AV button from BeoVision 11, BeoSystem 4 and BeoPlay V1 products.
- Beo6 firmware update 3.40a.
talisman: Chang in Configuration Tool version 6.84 : - Disabled drag and drop for hard keys.
This is VERY bad! How do I add 3rd party IR commands to the hardware buttons with the new version? is there a new way or no chance?I mixed config pages B&O devices with 3rd party devices on one remote page, complete with hardware button mix. Is there a way to keep this functionality now with the new tool?
Would you be kind an email me a version of it? :P
"You think we can slap some oak on this thing?"
Me too, thanks.
# BS5 / BM5, BL 18, BL 11, 2x BL 3500, 2x 1636# BL 4, 2x 1636# BL 6000, 1636# Beolit 12, # BS3200, BL 4000, 1636#BL 8000,
1656#A&B100, 1656#Teufel Omniton202, Playmaker#BL4, Beo 1, Beo 4, Beo 5, Beo 6, Beo 5000, Beo 7000 RDS, A 9, BeoTime,
1636#BeoPlay A8,
Please also for me the new CT.
Thnx
Beovision 10-46, Beo6, Beosound 5+ Beomaster 5, Beolab 12.2, Beolab 12.3, Beocom 6000
Me too , Please
how can I get it? Could someone mail me instructions, please?
thanks
Torsten
Would you be kind an email me a version of it?
My Bang & Olufsen....
I'd like a link also.
regards Joost
BeoVision 11-55, BeoLab 8000, BeoRemote One BT, AppleTV 4, 2x BeoPlay A2, BeoPlay A1
I'd like a copy too.
Thanks
Steven
PLEASE - just look at this (found somewhere, sorry, no source saved):
To the moderators: If the following does not fit the forum rules, please delete my post.
As many people need help to find the ConfigTool 6.62 , here is the answer:
This was written somewhere in the archived forum but I can't remembre where.
You find the tool in the danish forum beoforum.dk but you must register to see the subforum for the software.
I used google translate to register, but the following is my little HowTo to register for non danish speeking people as I am:
On page www.beoforum.dk click on "Tilmeld" at the bottom left of the page to register.
You get to this page : http://beoforum.dk/ucp.php?mode=register&sid=7ee11df3e61071a01191a29ba0a51a19at the upper right select British English in the "Sprog:" field.
Click on "I agree to these terms"
You get to this page: http://beoforum.dk/ucp.php?mode=register&change_lang=en
Fill the needed fields and resolve the "Captcha" question by draging and droping the items to the right column:
Disse er kendte Bang & Olufsen udtryk. These are known Bang & Olufsen look.
Disse ting er ikke Bang & Olufsen udtryk. These things are not Bang & Olufsen look.
submit.
When logging in on the Index page, http://beoforum.dk/index.php , on the bottom leftBrugernavn: Username:Kodeord: Password:you will see in the "Beo5, Beo6" Forum a Subforum "Subforum: Konfiguration Software" which isn't displayed when you are not logged in.Here you will find the Config Tool in different versions.
- PLUS -
Just a little clarification about 64 bit,
The Version 6.0 and above Configuration Tool can be installed and update a Beo6 on 64 bit Windows operating system.The Version 6.0 and above Configuration Tool can be installed on a Windows 32 bit operating system and fully supports the Beo5, BUT not 64 bit because there is no 64 bit USB receiver in the Beo5 firmware. If you do connect a Beo5 to a Windows 64 bit system, the driver for Beo5 will fail to be installed.When the Beo6 has been upgraded with the new software, it can no longer be configured in a version 5 or older version of the Configuration Tool.
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Can't log in in the forum. Is it possible, that anybody send me the download link?
Configtool 6.62 is the last tool what is on Beoforum.dk and not 6.84.
who can give a link to config tool 6.84??
Can anybody send me a link to download this software?
thanks.
Mirco
Still waiting.
Please share the link of CT 6.84
Bonjour,
Comment puis-je obtenir cette dernière version ?
Cordialement .
Dan
Can anybody send me a link to download this software CT 6.82 ?
BeoVision 7-40 HD-Modul, BeoViision 11-40, BeoVision 8 32" white + Floor Stand, 2x Apple TV 4 mit Kodi, DVD2, HDR2, BeoSound 9000 MKIII White Edition, 2x BeoSound Moment + Floor Stand, 2x BeoSound Stage, BeoSound Core, BeoSound 35 brass, BeoSound 1 MKII + Floor Stand, 2x BeoSound 3, BeoSound 6, BeoSound 3200, BeoSound Essence , BeoPlay A9 Nordic Sky twilight, BeoPlay A8 MKII white + Floor Stand, BeoPlay A2 grey, 2x BeoPlay A3 white/bright blue, BeoPlay A1, 2x BeoPlay S3 white, Beolit 12 (White Edition), Beogram TX2, BeoLab 5, BeoLab 3, BeoLab 7-4, BeoLab 8000 MKII, Beolab 11, 2x BeoLab 3500, 4x LC2, 4x Beo4 - MK1-3, BeoRemonte One BT, 2x BeoRemonte Halo, Audio Terminal, Beolink 1000, BeoLink 7000, 2x EarSet A8, 3x A9 Keyring, EarSet 2, Form2, BeoPlay H6, 3x BeoTime, Beowatch, 2x Lightmanager Pro+ B&o Version, 4x BeoCom5, Beoline2, 3x Speakerphone, BeoTalk 1200, 5x Cabinets, MLGW, BLGW,
Please count me I'm for 6.82 also.
Eclipse 65V1-32Beosound M5Essence MK2BLI
Hi, sorry new to the forum so hope this is the correct way to ask a question?
Windows 7 64bit
I am a little confused about the 32bit & 64 bit issue. I have a beo5 & a disk with 3 config softwear versions on it 5.12 / 6.62 /6.84 it will not allow the pc to communicate & load any drivers . I have tried loading 6.62 & 6.84 still no luck.
will 5.12 work with windows 7 32bit??
Thanks in advance
All versions of configuration tool will work on a Windows 32 bit operating system, but it all depends on the version of firmware loaded in the Beo5/6 determines if it will connect because the USB (32 or 64 bit) driver in the firmware and the Tool need to be the same. See table
Regards Keith....
You have CT 6.84. Please post a link on this vorm to help others like they help you.
You want help and you got it from Keith. A lot of members are searching for CT 6.84.
So now you can help us to share the link to your CT 6.84. That's what the forum is for, to help each other.
also still search the topical version. It would be very grateful for it.
Hi Solex,
Yes i don't have a problem helping others as you suggest.
But having had to pay for the programme, i think you are jumping the gun a little if you don't mind me saying so!!
I Have established that the copy i have is corrupt some of the programme files have not copied correctly!! (later version 6.84)
1.In the first instance i have only a copy on disk 2. I have as yet been unable to see if the programme actually works as i have been able to establish the driver file intact is corrupt !! (i am not very technical so i am having to get a friend to help!)
I only own a Mac so having to get laptop with windows 32bit.
3. i do not know how to provide any kind of link to the updated programme as i have already stated i only have it on a DVD Disk.
4. I have asked my friend who lives in the USA to send me another copy
5. I am away working in The Netherlands at the moment & am trying to sort my Beo5 remote out in-between home & work (Home is UK)
6. I have now also established i have a problem with the battery & trying to address this issue also.
With the greatest respect to all four members i subscribe to the ethos of helping & shearing knowledge to one & all!! but as a new member i am starting to feel i am being at the very least badgered & at worst harassed a little!!
Please be patient if i need help i will ask advice & i would respectfully ask that members need to remember what it was like for them when they where new members!!
7. As soon as my IT friend has sorted a new copy out & i have successfully loaded the programme & i have connected to my Beo5 i will of course be happy to provide what ever help i can to other members.
I am sure that members will at very least not appreciate me providing a copy of a programme that i have already been told is corrupt this can only be counter productive.
will update as soon as i have any update
Jonathan
Hello Jonathan,
I would be also glad very much about it and already say THANKS.
Udo
your more than welcome will be happy to help as soon as i can.
Hi,
Where I can buy Configuration tool for Beo6 ?
Regards
Thanks for your helpful post. However I am having trouble with the anti-bot question. As far as I can tell These are "Known B&O Look (left column)" (which I presume means products): BeoVision, BeoSound, BeoSystem, BeoVox, BeoLab, Beo4
And these are not: BeoVoks, BeoDrik, BeoCar, Peter Bang, Svend Olufsen
Not sure whether you have been successful yet but if not, try to add Peter Bang and Svend Olufsen too.
I would also like a link to the new beo5/6 configuration tool.
Thx
Hello,
Can you provide me the link to download this new version?
Thanks in advance.
Didier
@ kallasr:
I wrote this How To to download the Config Tool on beoforum.dk HERE in BeoWorld
That worked, I managed to register and have been able to download CT 6.62. Now to see if I can use to it to get my remotes working properly! Thanks. A.
How can I get 3rd party IR codes onto the hard keys? Is this not possible anymore? Any solution for this?
Hi Keith
I have Firmware 3.30a on my Beo6 and I am running windows 7 64 bit.
Will the Beo6 be able to communicate with software version 6.84?
Will this then update the firmware to 3.40?
Your help is much appreciated.
Thank you.
Kiran
Born in NL; I ride ML
I would like a download link får CT 6.84 if someone would like to share.The forum mention earlier only have the 6.62 version :(
Best regards
I would be very interested too if someone would like to share a download link. :)
Can you kindly send me the New Configuration Tool version 6.84, for Beo5/Beo6 to me?
zenadu74@hotmail.com