Lintronic makes BEO4 a universal Remote

hfat — Tue, 13 Mar 2012 06:31:52 GMT

Current revision posted to <Members Own Technical Pages> by hfat on 13/03/2012 06:31:52

Lintronic makes BEO4 a universal Remote

Filed under: BEO4, Universal Remote

Some people like the BEO4 remote controller and want to control all their non B&O equipment with the BEO4 remote controller, although it is not integrated with B&O. With the Lintronic -238 box you can make your BEO4 a universal remote very easily.

You have to use the box with it's own IR-receiver. You can control your devices just in the same way, as you would do with B&O integrated devices.

Step 1: You assign a Beo4 source key to each of your devices

Step2: You compile the memeory map as needed to control every device

Step3: Place the box in a position, wehe the emitted IR-signal can reach all you devices to be controlled. You can use high power IR or low power IR-emitter cables.

Step4: Place the IR-Eye wher it can be reached by the BEO4 IR-Signal

For details please refer to the integration guide document downloadable in the section "Integrating "Integrating non-B&O using Lintronic"

Lintronic makes BEO4 a universal Remote

hfat — Tue, 13 Mar 2012 06:21:26 GMT

Revision 3 posted to <Members Own Technical Pages> by hfat on 13/03/2012 06:21:26

Lintronic makes BEO4 a universal Remote

Filed under: BEO4, Universal Remote

Some peaple people like the BEO4 remote controller and want to control all their non B&O equipment with the BEO4 remote controller, although it is not integrated with B&O. With the Lintronic -238 box you can make your BEO4 a universal remote very easily.

You have to use the box with it's own IR-receiver. You can control your devices just in the same way, as you would do with B&O integrated devices.

Step 1: You assign a Beo4 source key to each of your devices

Step2: You compile the memeory map as needed to control every device

Step3: Place the box in a position, wehe the emitted IR-signal can reach all you devices to be controlled. You can use high power IR or low power IR-emitter cables.

Step4: Place the IR-Eye wher it can be reached by the BEO4 IR-Signal

For details please refer to the integration guide document downloadable in the section "Integrating non-B&O using Lintronic"

Lintronic makes BEO4 a universal Remote

hfat — Tue, 13 Mar 2012 06:20:58 GMT

Revision 2 posted to <Members Own Technical Pages> by hfat on 13/03/2012 06:20:58

Lintronic makes BEO4 a universal Remote

Filed under: BEO4, Universal Remote

Some peaple like the BEO4 remote controller and want to control all their non B&O equipment with the BEO4 remote controller. , although it is not integrated with B&O. With the Lintronic -238 box you can make your BEO4 a universal remote very easily.

You have to use the box with it's own IR-receiver. You can control your devices just in the same way, as you would do with B&O integrated devices.

Step 1: You assign a Beo4 source key to each of your devices

Step2: You compile the memeory map as needed to control every device

Step3: Place the box in a position, wehe the emitted IR-signal can reach all you devices to be controlled. You can use high power IR or low power IR-emitter cables.

Step4: Place the IR-Eye wher it can be reached by the BEO4 IR-Signal

For details please refer to the integration guide document downloadable in the section "Integrating non-B&O using Lintronic"

Lintronic makes BEO4 a universal Remote

hfat — Tue, 13 Mar 2012 06:19:37 GMT

Revision 1 posted to <Members Own Technical Pages> by hfat on 13/03/2012 06:19:37

Some peaple like the BEO4 remote controller and want to control all their non B&O equipment with the BEO4 remote controller. With the Lintronic -238 box you can make your BEO4 a universal remote very easily.

You have to use the box with it's own IR-receiver. You can control your devices just in the same way, as you would do with B&O integrated devices.

Step 1: You assign a Beo4 source key to each of your devices

Step2: You compile the memeory map as needed to control every device

Step3: Place the box in a position, wehe the emitted IR-signal can reach all you devices to be controlled. You can use high power IR or low power IR-emitter cables.

Step4: Place the IR-Eye wher it can be reached by the BEO4 IR-Signal

For details please refer to the integration guide document downloadable in the section "Integrating non-B&O using Lintronic"