ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I have Beovox 3702 speakers. Somone had cut the cables close to the back. Does anyone know how I can replace the cables?
Welcome to Beoworld !
Take off the front panels, losen the woofer and swing it aside.This will give you access to the crossover filter boards.The cables are soldered to the boards so easily replaced.Use 2x0,75mm2 cable and make sure to get the polarity right.
Martin
Thank you for the information! Have removed the woofer, how do I see which wire is plus or minus?
You can refer to the schematics.Some original cables have a grey stripe down the positive lead. Maybe you can spot this on theremaining piece of cable.
The speakers are connected now, sound good! thanks for all the help!