ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Dear Forum,
since my newly added MCL2AV has got no power adapter, I just bought one from Amazon.
Now the question is: what polarity do I need to use?
I will try to use the MCL2AV with transceiver to use a second Beosystem in my Office (Link Mode).
Thanks for your help!
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Hello Ralf,
for the power connection you need the polarity scheme on the right side. The positive 15 V has to be on the outer connection and ground has to be on the middle hole of the power cable.
The MCL2AV power connection has the ground at the center pin and the +15V have to be supplied via the shield connector.
Ralph-Marcus