ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Will the speaker display work on my penta 2's when used with the beosound 9000 using the 7-din pin connecting cables? thanks for reading and letting me know, Rob
No, you need to use 8 pin fully connected (used to be called Mk2) powerlink cables.
Regards Graham
moser26:Will the speaker display work on my penta 2's when used with the beosound 9000 using the 7-din pin connecting cables? thanks for reading and letting me know, Rob
Beolab 50, Beolab 8000 x 2, Beolab 4000 x 2, BeoSound Core, BeoSound 9000, BeoSound Century, BeoLit 15, BeoPlay A1, BeoPlay P2, BeoPlay H9 3rd Gen, BeoPlay H6, EarSet 3i, BeoVision Eclipse Gen 2 55", BeoPlay V1-40, BeoCom 6000 and so much else :)
I have a BS9000 connected to Beolab Penta II's (via Beolink Wireless) and they work fine. You do need the fully wired (thicker) cables as Graham states. I thought my Pentas were broken when using the thin cables I had.
Stoobie