ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I have tried to connect mij mp3 player to mij beocenter by using the aux input but then the volume is very low. Does anybody knows how to solve this?
I had this issue with a DIN to 4 RCA cable.
Even though it said aux-in left and right on the cable it was just labelled wrong.Changing it to the ones labelled aux-out it worked.Writing this to show it might just be a cable issue.You need MP3 to AUX.
What kind of cable are you using?
THIS should work.
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
I have a 5 pins din connector to 2rca and than 2rca to mp3(3.5mm). Do you think it would make any difference when its is an direct
5pins din to mp3?
Maarten
allright I orderded one, i wil let it know if it makes a difference
I received the cable and it works perfect, I think that the 2 wires from the jack goed to other pins on the connecter.