Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BeoLab 11 fault

rated by 0 users
This post has 4 Replies | 0 Followers

JC
Top 150 Contributor
West Yorkshire
Posts 764
OFFLINE
Silver Member
Reply
JC Posted: Tue, Sep 18 2018 10:39 AM

Before I start digging thought I would ask her, see if anyone has experienced the same.

 

BeoLab 11 turns green but just buzzes, It is connected to BV11, tried swapping PL cable but no joy. Any ideas?

 

Jonnie

Brian
Top 500 Contributor
London/Aarhus
Posts 219
OFFLINE
Bronze Member
Reply
Brian replied on Tue, Sep 18 2018 2:37 PM

I too have a problem with a BL11, it turns green ok and the 8000s connected to it play as they should - but the BL11 only omits a loud THUMB every 5-7 seconds.

The 11 is connected to a Beosound Core via a splitter and a mark 3 power link cable all from Steve.

When I connect my BL2 to the same setup everything plays as it should.

Brian
Top 500 Contributor
London/Aarhus
Posts 219
OFFLINE
Bronze Member
Reply
Brian replied on Tue, Sep 18 2018 2:38 PM

Did you adapt the settings underneath the 11 for external bass management?

JC
Top 150 Contributor
West Yorkshire
Posts 764
OFFLINE
Silver Member
Reply
JC replied on Wed, Sep 19 2018 8:50 AM

Regards settings, nothing has changed in the 7 years I have had it connected.

JC
Top 150 Contributor
West Yorkshire
Posts 764
OFFLINE
Silver Member
Reply
JC replied on Wed, Sep 19 2018 9:13 AM

Having turned up the db settings on TV the speaker is working

but, the buzzing is constant!!!

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly