Numbering LC2s does not work

I'm adding a third LC2 to my light setup, but I cannot number the new LC2.

I follow the manual exactly.

It just not reacting to any number.

I've also tried to change number on the two existing but that does not work either.

Any advise?

Is it possible to "Factory reset" or similar?

Sorry - are you sure, you touched the black dome while programming the lamp number?

Does your LC2 respond to fingertouch? Are you able to set on-off by touching the black dome?

A kind of factory reset should be LIGHT - SETUP - 0 - STORE - GO - 4, if I remember correctly.

This info should be - as all useful info - in the old forum.

If your LC2s don`t respond to touches you will need new domes.

Hope this helps

Stefan

stefan:

Sorry - are you sure, you touched the black dome while programming the lamp number?

Does your LC2 respond to fingertouch? Are you able to set on-off by touching the black dome?

A kind of factory reset should be LIGHT - SETUP - 0 - STORE - GO - 4, if I remember correctly.

This info should be - as all useful info - in the old forum.

If your LC2s don`t respond to touches you will need new domes.

Hope this helps

Stefan

Touching the dome did the trick!

Why did they not mention that in the manual?

At least not the Swedish, what I can see.

Thanks Stefan!