ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi Beogram experts, posted this in the general forum, so it may have got lost as I didn't have any responses.
My BG4000 sets down far too early. As soon as the sensor reaches the platter, the tonearm lowers - i.e approx 1" before the actual start of the record. It happens irrespective of whether there's a record on, platter only etc etc.
Is this likely to be mechanical or electrical ? Hopefully someone can give me a few pointers on where to start looking.
Many thanks !
Most likely to be an incorrect adjustment of the setdown switch.
Martin
Thanks Martin - I take it that's one of the slide contact springs ? Not sure which one it is, but will ensure all are the correct distance accord to the service manual.
Really appreciate the swift response !
Sorted it with a quick email from Rudy. He said to check the singles switch, so I cleaned all the contacts again with some 2500 wet & dry and everything works perfectly !