beosound 5 stays on when changing source on beovision

Hi and merry christmas to everybody

If I change the source on the TV (DTV or v.mem) after playing radio or cd, the BS5/BM5 is still on showing the last radios or cd played.

Option 0 for the BS5

Option 2 for the tv

 

 

 

Hi olvisab,

I assume the reason for this behaviour is not the BS5/BM5, but the BV7, because BS5/BM5 gets the command to shut down from BV7.

I have a similar problem with my BV10 in link room (option 6). I had reported this to my dealer and Beocare in 2011, but nobody is able to solve the problem by providing a software update. Very bad service from B&O!

Merry christmas!

Räuber

Hi Raueber,

The problem is that my bv 7 40 has been fully updated 10 days ago. So I don't think it is due to this.

I add a MLGW. I will check if it doesn't modify my set up.

I will let you know if I find a way to solve this.

I think I didn't have this behaviour before... updating my BV.

BR

OLivier

Are you using a Beo4 with navigation button?

If so, To what ZONE is it set to?

Not sure, but try VIDEO with your setup...

merry christmas...

Stefan

Hi Stefan,

I don't use a beo4 with navigation button

Ok - I thought you have the same fault I had.

Now I'd disconnect the BV from mains for 10 minutes and reconnect.

Set options again and try again. BS5 is audiomaster?

Does your setup behave the same way vice versa?

Does your BV stay on (screen) when you change from video to audio?

Stefan