Detailed photos wanted of relay used in Beogram 1203

Reply

LesleyV Posted: Mon, Apr 20 2020 11:55 AM

rated by 0 users

relay.jpg

Hello Guys,

One of the wires in the plastic relay box had a bad connection, reason why I opened the box to resolder the wire.

But then the two black plastic levers fell out. I managed to put them back but i want to make sure i did this correct.

Reason why i would like to have some detailed pictures, especially from the side shown in the picture so I can determine how the lever has to be placed in relation to the contacts.

Thanks,

Lesley

Reply

Dillen replied on Mon, Apr 20 2020 12:25 PM

rated by 0 users

Will this help:

https://archivedforum2.beoworld.org/forums/t/18165.aspx

Martin

Reply

LesleyV replied on Mon, Apr 20 2020 1:28 PM

rated by 0 users

Inked20200420_140522_resized red dots 003.jpg

I saw this one but it did not help me. I have another version of this relay, one without springs on the outside. For now i put the contacts (see red dots on the pic) on the outer side of the lever but i am not sure it is right.Reason why i wanted a detailed pic.

Reply

LesleyV replied on Wed, Apr 22 2020 9:18 PM

rated by 0 users

Hi guys,

This position I have chosen for the lever (see pic) seems to be correct because everything is working fine. The only problem left is that the turntabe is running a bit too slow but retores itself after 5-10 minutes.So case closed so far.