ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello Guys,
One of the wires in the plastic relay box had a bad connection, reason why I opened the box to resolder the wire.
But then the two black plastic levers fell out. I managed to put them back but i want to make sure i did this correct.
Reason why i would like to have some detailed pictures, especially from the side shown in the picture so I can determine how the lever has to be placed in relation to the contacts.
Thanks,
Lesley
Will this help:
https://archivedforum2.beoworld.org/forums/t/18165.aspx
Martin
I saw this one but it did not help me. I have another version of this relay, one without springs on the outside. For now i put the contacts (see red dots on the pic) on the outer side of the lever but i am not sure it is right.Reason why i wanted a detailed pic.
Hi guys,
This position I have chosen for the lever (see pic) seems to be correct because everything is working fine. The only problem left is that the turntabe is running a bit too slow but retores itself after 5-10 minutes.So case closed so far.