Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Harman Kardon BTA-10 and A9 1st Gen!

rated by 0 users
This post has 2 Replies | 0 Followers

digafarm
Not Ranked
Posts 7
OFFLINE
Bronze Member
Reply
digafarm Posted: Wed, Feb 3 2016 10:34 PM

Hi everyone,

I have bought the bluetooth receiver for my A9 as the connectivity with Wi-Fi is horrible. There seems to be a problem with the line-in though. I have tried playing via the receiver and also directly from iPhone with line-in, and it does not work. Any ideas? 

It works fine with the Wi-Fi (until it randomly drops from time to time, or can't connect)

Thanks in advance!

Millemissen
Top 10 Contributor
Flensborg, Denmark
Posts 14,680
OFFLINE
Gold Member
Reply
Millemissen replied on Thu, Feb 4 2016 10:21 AM

Did you turn up the volume on the connected device/s?

Usually this should be set to nearly max and the volume control should be made by the A9.

Notice - when you start be sure, that the volumen of the A9 isn't too high.

The line-in connection should autodetect/autosense, that there is something playing and switch the A9 to line.

If you have a Beo4 (?), have you tried pushing 'A.Aux' to activate the line-in of the A9?

MM

There is a tv - and there is a BV

digafarm
Not Ranked
Posts 7
OFFLINE
Bronze Member
Reply
digafarm replied on Thu, Feb 4 2016 4:01 PM

I tried maxing the volume on the A9 and the iPhone, also set it to Maximum in the BeoPlay app on my iPhone. Didn't work.

I don't have Beo4 unfortunately. 

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly