ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
With my troubled Beomaster 8000 also came the remote and it had issues as well. Only volume and PH and TP2 worked, so I was thinking that there might be a crack on the board.
[View:http://archivedforum2.beoworld.org/themes/hawaii/utility/:800:0]
I removed the isolator and added some led to the cleaned new tabs.
And soldered jump wires to get the board lines to connect again:
It was easy 10 minute job and now the remote works again correctly
Well done!
Jacques
If you haven't already, it's worth replacing the battery connector , I've seen a few of these that come apart
regards Jason