ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi I have a beosound 5 encore and a beosound 3200
what device should I get to connect the two system to one pair of beolab 3 with only one on at a time?I guess a 1 female 8 pin to 2 male 8 pin cable ?
will this harm any device if I only open one ( 5 or 3200) at same time?Thanks
Any one knows whether I can achieve this without using the almando switch which is so expensive?
thanks
"You think we can slap some oak on this thing?"
I think only another cable I can make it
but I never use Aux before
what will happen if I do so?
Thank you a lot for replying
You can use the Aux connection.
But you will have to deal eith two volume controls.
Since the Aux-in of BS3200 will expect a signal at line-level volume, you will have to turn the Encore up to a fitting volume.
Best do all volume control afterwards with the 3200/the Beo4 on the 3200.
Tip: best set the Encore to Option 0 or Option 4 - so that it won't react directly to the commands of the Beo4.
The Almondo is merely a switch.
But it is an intelligent one - and imo worth the price, if you really need and use it.
MM
There is a tv - and there is a BV
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
So if encore is connected as AUX
if can be viewed as a outerner music source for the beosound?
The music is stored in the encore and played by beosound, right?
thank you for answering!
I m sorry I'm kinda confused
In this case how can I play musics stored in the encore?
Hi guys what if I want a third part? A beoplay Maker?
any possibility?
Peiya: So if encore is connected as AUX if can be viewed as a outerner music source for the beosound? The music is stored in the encore and played by beosound, right? thank you for answering!