Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 1 Fault, Red power led turns green on switch on, & turns back to red in 3 seconds

rated by 0 users
This post has 1 Reply | 1 Follower

DJatter
Not Ranked
Posts 1
OFFLINE
Bronze Member
DJatter Posted: Mon, Mar 20 2017 1:34 PM

Hi, Thanks for looking, One Beolab 1 speaker turns green on power up & returns to red in 3 seconds, the other speaker powers up & plays, I have swapped the cables & then the channels so looks like fault within the speaker (gulp) . .  . Any suggestions gratefully received . . . Regards !

Beobuddy
Top 25 Contributor
Utrecht, The Netherlands
Posts 3,972
OFFLINE
Founder
Beobuddy replied on Fri, Mar 24 2017 2:25 PM

Sounds like the protection steps in.

Several culprits can cause this. Faulty driver(s), NTC, amplifier etc.

If swapping the cables doesn't help, the BL1 needs a repaircentre. (or me ;-) )

Page 1 of 1 (2 items) | RSS