Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

Beosound 3200 volume control problem

rated by 0 users
This post has 5 Replies | 1 Follower

jhstitzel

Posts 2

OFFLINE

jhstitzel Posted: Mon, Jul 27 2015 7:03 PM

rated by 0 users

I am new to the forum and I have no experience with Bang and Olufsen components. I need help.

I purchased a system at an estate sale and have connected a Beosound 3200 to Beolab 8000 speakers using the 8 pin connectors.

I can successfully play a CD, however, I am unable to adjust the volume. Neither of the volume buttons nor the Mute button on the face of the 3200 do anything.

When I try to adjust the volume using the Setup button I get a message that says " Use TV".

I have a remote in which I have installed new batteries but it seems unable to make any connection with the 3200.

I am hoping that someone can give me some advice.

Thanks in advance.

John

Posts 22

OFFLINE

sl replied on Mon, Jul 27 2015 8:12 PM

rated by 0 users

Hi John,

The BeoSound has three different option
settings:
Option 0. Used in a fully integrated Audio/Video
system with no speakers connected to the
BeoSound . The sound is reproduced
through the speakers in the TV, or through
speakers connected to the TV.

Option 1. Used when the BeoSound is used on its
own or in an Audio/Video integrated setup, with
active speakers connected to the BeoSound (factory setting).

Option 2. Used in a two-room Audio/Video integrated setup.
The programming is done with a Bang &
Olufsen remote control Using a Beo4…

Audio/video setup BEO4:

Hold the ''•'' button down
while pressing LIST
Now let go of both buttons
Press LIST until OPTION? is displayed
Press GO
Press LIST once to display A.OPT
When A.OPT is blinking in the Beo4 display press 1

Regards,