ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi,
Just something to share, should it be useful to someone!
My CDX lid would sometimes be stuck open or closed, or even halfway.
After much fiddling (new belt, adjusting, you know) it turned out to be bad solder joints at the green and light grey connectors on the motor command PCB, invisible without a magnifying glass...
I should have known, but so many posts explained how a bad belt or lid adjustments could have such an effect led me on the wrong tracks (for once)!
Jacques
chartz:led me on the wrong tracks (for once)!
Its always the little things, well spotted.
Are you back on track :-)