Glueing Beogram TX metal arm cover and metal cover plate surrounding the turntable.

What is the best product to use glueing these cover plates back on? Also, what is your advice on cleaning and prepping both surfaces before applying glue. As always thanks for your help.

zapdady 

I use a 3M automotive foam tape.

Any advice on removing the old hardened tape adhesive? Thanks.

zapdady

I run the aluminum top under hot water and rub off the gunk with my fingers. The plastic I use hot water on a rag to rub the gunk away. Goo gone works too but I prefer the water method.

Thanks, Saint,

I see now that it is easier than I thought. You guys rock.

zapdady