ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi all,
I hope that you can help me with this issue.
Please look at the photo of my setup. I need help regarding two ways communication. How must I setup the NL/ML converter in order to play NETRADIO stations on my ML TV’s? Change channel etc.
Thank you in advance
Link https://postimg.cc/xcqxn333
Living Room: BeoVision 7-55 MKII / BeoLab 7-6 + BeoRemote One + 2x BeoLab 8002 + BeoLab 2 + 2x BeoLab 6002 + BeoSound 9000 MKII + BeoSound Core + BeoCom 2 + BeoLink Gateway + BLC NL/MLMaster Bedroom: BeoVision 11-55 MKIV + BeoRemote One + 2xBeoLab 6000 + 2x BeoLab 4000 + BeoTime + BeoCom 2Guest Bedroom: BeoVision 6-26 MKIV + BeoRemote One + BeoCom 6000Home Office: BeoVision 10-32 + BeoRemote One + DVD1 + BeoCord V8000 VHS + BeoSound 8 + BeoSound 1 (CD version) + BeoPlay A1 + BeoCom 2Sewing Room: BeoVision 10-40 MKII + BeoRemote OneBathroom: BeoPlay M3 + BeoRemote One
BS9000 + BS Core + Beosystem 3 + BL8000 + BL4 + BL2 + BL7-1 // BeoVision 7 32“ + BL8000 // Beoplay M5 // Beoplay S3 // 2x BL3500 // 2x BeoPlay A6 + 2x Essence Remote // 2x BeoSound 8 // Playmaker + BL6000
Hi jgraefe,
The software on BS9000 is 2.0.
Now, when I press NMUSIC on BeoRemote One in the living room my BV7-55 turns on NETRADIO on the Core via BeoSound 9000. However, on the display "PHONO" appears. Anyway I'm able to fully control the CORE via the IR eye – turn on NRADIO, change radio channel etc.
This is currently not possible on the rest of the ML TV's.
According to this thread you need SW2.2 to use N.RADIO or N.MUSIC on your BS9000: https://archivedforum2.beoworld.org/forums/t/23350.aspx
The thread also includes a link to detailed instructions for upgrading SW, posted by Keith.
And PHONO is displayed instead of N.RADIO because it uses the same (old) IR code. You will probably also find that selecting N.MUSIC indicates A.TAPE2, for the same reason.
mmmoller:Hi jgraefe, The software on BS9000 is 2.0. Now, when I press NMUSIC on BeoRemote One in the living room my BV7-55 turns on NETRADIO on the Core via BeoSound 9000. However, on the display "PHONO" appears. Anyway I'm able to fully control the CORE via the IR eye – turn on NRADIO, change radio channel etc. This is currently not possible on the rest of the ML TV's.
Thank you very much. I'll try that out!
Also thanks to Guy for linking to a relevant thread regarding this issue.
mmmoller:Hi all, I hope that you can help me with this issue. Please look at the photo of my setup. I need help regarding two ways communication. How must I setup the NL/ML converter in order to play NETRADIO stations on my ML TV’s? Change channel etc. Thank you in advance Link https://postimg.cc/xcqxn333
connect the Core to your (W)LAN (no IR)
integrate the Core as a Primair Source in the BV11
connect the BLC to your (W)LAN and ML
program the BLC as Source Center
post sent ............but awaiting moderation..........
That sounds interesting – good tips. Thanks Carolpa.
Actually I already have a NL/ML delay box, but I'm not sure what the delay settings should be set at. All my NL products are hardwired (expect the M3 ofc.)
Do you have any experience in this area?