PS3 to turn on Avant

Reply

CJM1 Posted: Tue, May 1 2012 11:14 PM

rated by 0 users

How do i set up my PS3 to turn on my Avant? As i have seen this done on a video before

Clarke

Reply

Ronnie replied on Wed, May 2 2012 12:50 PM

rated by 0 users

Since seeing that video on youtube, i also have wondered how it's done.

Reply

Opman replied on Wed, May 2 2012 3:27 PM

rated by 0 users

A while ago I had a cheap supermarket DVD player connected to my Avant. Switching on the DVD player turned on the Avant, I don't recall doing anything other than assign the scart socket in the set up menu.

I have since replaced the Avant with a BeoVision7 so I can't check it for you.

Opman

Reply

ngnear replied on Thu, May 3 2012 3:10 PM

rated by 0 users

I have a Pinnacle ShowCentre attached to the DVD Scart input. When I switch on the ShowCentre my Avant either turns on or changes over to DVD.

I think you must have Scart cables that are fully wired as the signal is transmitted over one of the pins.

Tim

Reply

CJM1 replied on Thu, May 3 2012 8:28 PM

rated by 0 users

What do you mean by "fully wired?" does this mean the connector has to have pins in every single hole?

Reply

CJM1 replied on Thu, May 3 2012 8:28 PM

rated by 0 users

What do you mean by "fully wired?" does this mean the connector has to have pins in every single hole?

Reply

ngnear replied on Thu, May 3 2012 10:39 PM

rated by 0 users

Not only all the pins, but the pins should be all be wired through to each other.

Just search for scart connections with your favourite search engine.

Tim 

Reply

CJM1 replied on Sat, May 5 2012 11:44 AM

rated by 0 users

Thanks Tim! i will have a look