Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beogram CD 5500 lights

rated by 0 users
This post has 5 Replies | 1 Follower

nbohemen
Not Ranked
Posts 10
OFFLINE
Bronze Member
Reply
nbohemen Posted: Tue, Jul 29 2014 4:04 PM

Has anybody any idea how I can fix the "track" lights in a Beogram CD 5500. Sometimes a digit is missing because of a faulty bulb. Are these LED lights or small lamps?

Maybe it is the soldering that is getting bad after all these years. Maybe someone can help me. The rest of the system works perfect.

Leslie
Top 25 Contributor
the Netherlands City
Posts 5,423
OFFLINE
Silver Member
Reply
Leslie replied on Tue, Jul 29 2014 4:23 PM

Leds

Brengen & Ophalen

nbohemen
Not Ranked
Posts 10
OFFLINE
Bronze Member
Reply
nbohemen replied on Tue, Jul 29 2014 4:34 PM

Ok thanks. Then it would be the soldering, I reckon.

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Tue, Jul 29 2014 4:40 PM

Probably the LEDs own solder joints have cracked. It wouldn't be a first.
Reflow the whole row.

Martin

nbohemen
Not Ranked
Posts 10
OFFLINE
Bronze Member
Reply
nbohemen replied on Tue, Jul 29 2014 4:42 PM

That could be a good idea. How do I establish which LEDS are used?

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Tue, Jul 29 2014 7:39 PM

They are custom LEDs if I remember correctly - but they rarely fail and
I am almost sure that resoldering the lot will cure the fault.

Martin

Page 1 of 1 (6 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly