ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Set up Beovision 11-55, 6000 speakers front and rear, Beolab 2
If I switch the left hand speaker to right channel, I get sound, but not when it's switched to left channel. If I change the front right speaker to left channel, no sound, but working as it should on right channel
To a novice, this sounds serious. Any thoughts?
4 beolab 5, beolab 9, beolab 10, beolab 5000, beolab 8000 mk2, beolab 6002, beolab 3500, beovision 7 55 mk2, 2 beovision 11 46 mk4, beotime, beosound ouverture, beosound essence, beoplay A8, beomaster 900 RG de luxe and the collection continues...
What source are you using?
Internal tuner / external device (connect via ...)?
Is the Balance set to the very right?
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Hi both
Thanks for prompt reply. Using internal tuner
Sorry I clearly didn't explain myself very well. Sliding the internal speaker switches is exactly what I have done. Right hand channel works, but not left hand - for both left and right speakers. Balance is correct
Fault identified, a replacement cable has been ordered! Phew!