Beogram 4002 platter spins anti-clockwise

Reply

ALF Posted: Fri, Nov 28 2014 1:11 PM

rated by 0 users

dear members,

one of my Beogram 4002 tables causes the following problem:

after I pulled the motor apart for a lube service and change of a blown fuse

the platter now decided  to spin anti-clockwise ??

plugs are all in place correctly....but what could cause that kind of problem ?

any ideas anybody ??

thanks for your replies :-))

Reply

tournedos replied on Fri, Nov 28 2014 1:14 PM

rated by 0 users

I'm afraid I'll go with the obvious guess that you didn't assemble the motor correctly...

Is it AC or DC motor version?

Reply

ALF replied on Sat, Nov 29 2014 12:59 AM

rated by 0 users

hi mika,

it is the AC motor version !

there is really nothing that one could do wrong in the re-assembly process, couldn't one ?!?!

no loose parts, except its cover !

unscrew the cap, lubricate the motor and close it again ???

or did I miss anything ?

Reply

chartz replied on Sat, Nov 29 2014 8:17 AM

rated by 0 users

Does it turn counterclockwise any time? Does the platter rotate on its own?

Methinks you might have put the magnet upside down when you re-assembled the motor.

Reply

ALF replied on Sat, Nov 29 2014 3:24 PM

rated by 0 users

Yes, spin anti-clockwise  when turned on.

I will check the motor assembly again - nothing is impossible

Thanks for the thought anyway

Cheers, Alf

Reply

ALF replied on Fri, Dec 5 2014 9:50 AM

rated by 0 users

the ac motor is re-assembled correctly - there is only one way

cheers, alf