Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Installing a Technisat HDFV receiver to the MX7000

rated by 0 users
This post has 2 Replies | 1 Follower

petsnaturally
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
petsnaturally Posted: Tue, May 22 2012 12:12 AM

I have just purchased a Technisat HDFV Freeview HD Digital Receiver to attach to my MX7000 TV.

I have connected it via a scary plug to the AUX 2 input on the TV.

 

The receiver is supposed to launch automatically and open an install dialog box on screen - but nothing happens when I plug in.

 

Does anyone have any ideas as to what I may be doing wrong ?

 

Regards

Peter

BeoIce
Top 150 Contributor
Recklinghausen, Germany
Posts 751
OFFLINE
Bronze Member
Reply
BeoIce replied on Tue, May 22 2012 7:24 AM

Hi and welcome to Beoworld !

You mean that you don't get any picture of your Technisat on TV ?

You connected your Technisat to AV2, so you have to configure your MX7000 to use AV2 for V.TAPE. This is done via MENU. If it's configured right, then you can press V.TAPE or V.MEM on your remote to power on your MX and switch to AV2.

Hope this helps.

Regards

Martin

BeoSound 9000 MK3, BeoLab 8000, BeoLab 6000, BeoLab 3500, LCS9000, BeoLab 11, BeoLab 7.2, BeoLab 7.1, Beolab 4 PC, BeoCenter 2300, BeoSound Century, BeoSound 8, Beosound 2, BeoVision 7-40 MK2 , BeoVision 7-32 MK3, BeoVision 6-22, BeoVision 4-42, BeoMedia 1, BeoCom 4, BeoLink 1000, BeoLink 5, BeoLink 4 & BeoTime

petsnaturally
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
petsnaturally replied on Tue, May 22 2012 10:25 AM

Thanks Martin

I had configured the MX7000 to everything but V-Tape - will try again

 

Regards

 

Peter

 

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly