ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi Beoworlders,
I have a Beolab 5s that were off due to a power outage. The power's back on and the pincodes have been entered. Both Beolabs have the green light when CD is selected and red light on standby, but sound only emits from one speaker..
I've tried switching cables, but same result.
Does anyone have any ideas as to how to resolve this??
x:________________________
A wild guess, power the whole lot down for a few hours. Turn it all back on and see how it goes.
Hope this works for you.
If that dosent do it, try and reset the speaker by pressing down the calibration button for a long time, the speaker Will abort the measurement and make som beeping sound if I remember correctly.
If that helps recalibrate and enjoy.