ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I take it you have checked it's not set to option 0?
And that it's not come loose from the socket inside?
You can send it over for repair ;-)
I fixed one a few weeks ago.
Any progress on this? The reason I asked about transferrability is that there are 2 units on eBay at the moment:
http://www.ebay.co.uk/itm/221759851140?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/190924552418?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
You'd obviously need to check part numbers etc and I'm not sure which bits you actually need.
Dave.
I can't remember exactly. And that is rather odd, as I regularly have these units.
The difference between the 9500 and 9300 starts with the difference in 2 way infrared. The 9500 has 2 way. The 9300 is based on the ouverture and has only 1 way. The last time I repaired the ir-module for the 9300, it had SMD capacitors mounted on the board. besides the differences between the board I don't remember exactly if you can easily swap the boards. That's beside the fact that 2 way communication will not work obviously.