Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BeoVox CX 75 question-advice needed

rated by 0 users
This post has 2 Replies | 1 Follower

costa69
Not Ranked
Posts 1
OFFLINE
Bronze Member
Reply
costa69 Posted: Sun, Jun 10 2012 2:56 PM

Hi everyone,I' new here!

I have a few vintage B&O units that have always been stored.

I decided to start using my Beocenter with my BeoVox CX 75s,but they are in need of refoaming (or new cones).Any advice?Know any repair shops in London?

Thanks in advance!

jlehtinen
Not Ranked
Sweden, Stockholm
Posts 33
OFFLINE
Bronze Member
Reply
jlehtinen replied on Tue, Jun 12 2012 2:00 PM

Hi,

Refoaming is quite aesy task to do, if you are "DIY oriented". Wink  Foam rings can be bought from ebay for example. I did refoam two pairs of CX50 and it took couple of hours, hardest part is to clean old rotten foam from cone and supporting frame.

jlehtinen
Not Ranked
Sweden, Stockholm
Posts 33
OFFLINE
Bronze Member
Reply
jlehtinen replied on Tue, Jun 12 2012 2:03 PM

I got my foam rings from here: http://www.speakerrepairshop.nl/index.php?item=&action=page&group_id=10000013&lang=EN

They also have instructions available for refoaming.

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly