Added beolink active

Hello all

I have a party at 8pm this evening and I just bought a beolink active from the guys at lifestyle, thank you

Any idea how to get the beolink gateway to see it.

I tried capture but it does not see it.

Cheers all

You need a current master somewhere in the mix as well as an IR eye attached to the Active Kit. You will have to give a command to the active kit while the gateway is in ML capture mode so it can be identified on the ML side. After that you can then take the IR eye off and run the active kit completely through the gateway. 

Found t thank you.

It did not capture by pressing the IR it needed to be on or off via the remote.