ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Is there any way to set up a BV7-40 mk2 so that when pushing TV on the Beo4 it starts AV2 (scart)?
I have a digibox that I get the cable channels via internet connection.
Or is it only possible to get antenna signals to the TV-section of a Beovision?
Would be nice to use the A9 keyring to something else than turning on and off the lights :P
"You think we can slap some oak on this thing?"
With TV SW 30.08a it is possible to disable the internal analogue tuner and assign another source to the TV button.Officially the 30.xx SW is only suitable for TVs equipped with a DVB-HD modul but it will also work without any problems if this is not present.
If your TV is on 7.xx this function is not available and you would have to call your local dealer to perform a flash update and change the both SW ICs.
Had the update last year, but pretty sure it is 7something. Not paying 200 euros again just to get that function. Guess i just have to continue using the keyring for decoration :P
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).