Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Can I use a BeoVision 7-32 Type 4097 motorised Floorstand with a BeoCenter 6-26

rated by 0 users
This post has 4 Replies | 0 Followers

kallasr
Top 50 Contributor
Germany
Posts 2,562
OFFLINE
Bronze Member
Reply
kallasr Posted: Tue, Sep 1 2015 11:17 AM

I know the number in the pricelists says Type 4098 is for a BeoCenter 6-26.

But since both share the same motorised table stand Type 4092 I assue the wiring is the same.

So what is the difference between 7-32 and 6-26 Version of the motorised Floor stand - maybe the possibility to attach a Beolab 7 Speaker to the 7-32 Type 4097 Version?

Thanks for any hint

Ralf

Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096
Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8
Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55
Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)
Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)

In storage: Beolab 5000/Beomaster 5000 (1960s). 

Opman
Top 200 Contributor
Wilmslow, Cheshire
Posts 443
OFFLINE
Bronze Member
Reply
Opman replied on Wed, Sep 2 2015 10:20 AM

Hi Ralf

 

From my experience the motor floor stands for the BeoVision 6 26" and BeoVision 7 32" are interchangeable. You are correct to identify that the different type number refers to the pole of the BeoVision 6 26" version not having the holes to affix the plate for a BeoLab 7 loudspeaker.

The bracket that holds the set and the din plug are the same.

Regards

Opman

9 LEE
Top 10 Contributor
Eastbourne, UK
Posts 7,218
OFFLINE
Founder
Moderator
Reply
9 LEE replied on Wed, Sep 2 2015 10:34 AM
above.jpg

What that man said above is completely correct. Smile

kallasr
Top 50 Contributor
Germany
Posts 2,562
OFFLINE
Bronze Member
Reply
kallasr replied on Wed, Sep 2 2015 11:49 AM
Thanks to both of you!

Ralf

Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096
Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8
Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55
Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)
Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)

In storage: Beolab 5000/Beomaster 5000 (1960s). 

julefreund
Top 500 Contributor
Posts 317
OFFLINE
Bronze Member
Reply
julefreund replied on Wed, Sep 2 2015 11:25 PM

Hello Ralf,

additional to the mounting screws for the beolab 7 the florstand for the BV 7-32 is a little bit higher ( about 15 mm ) than the florstand  for the BV6-26.  I use my BC6-26 with florstand of the BV7-32. Works perfectly.

julefreund

 

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly