ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi
I have BV 8-40 connected to a STB via HDMI . I duplicated the signal ( I could not get a HD signal out of BV8) and I connected to a beamer.
Would it be possible to switch off the video of the BV8 and to maintain the audio in order to appreciate the beamer ?
Thanks for any suggestion
Add the P.Mute button on your Beo4 and Voilà!!! (I've got the same setup)
diisign.com
Search for P.MUTE ....
This should be covered in the user guide.(looked it up - it is...!)
Sorry, but why not look at the user guide (it is online on the B&O website as well...) first??
Best regardsRalf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Thanks for the information.
I have to admit that I looked on the manual available, but I noticed it only now after I received your suggestions.
My apology for cluttering the forum.
I don't think an apology is required. The forum is here to help and as a new poster you shouldn't feel that your questions are not worthy of an answer. Having worked in retail for decades I know from experience that the majority of users don't read (or understand) the guides supplied with the products.
Welcome to BeoWorld
Opman
@alfiio: Sorry, did't mean to offend you.
It is just - maybe just my view - that a lot of questions are asked here even though the answer are either in the manuals / PDFs or have been covered before etc.
I try to help most of the time
PS: any yes, welcome to the forum!