ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Guys I'm at an end please help
I have a Beovision 10 32 mk3 in my bedroom that has sky hd connected to it via HDMI and Scart.
I Have Masterlinked and RF linked it to my Beocenter 6-23 in my kitchen via the RF out on the Beovision 10.
I have double checked all connections and turned the Power Saving off.
I have then changed the option of the Beovision 10 to Option 2 and changed the option of the Beocenter 6-23 to option 6.
I have then turned off all the power to the Tvs of a minute and then went to access the Sky on the Beocenter and....... Nothin!!!!
My Installer is so confident that RF Link Amplifier is not needed for a TV to TV therefore have not got one.
PLEASE TELL ME THERE IS SOMETHING SIMPLE IVE DONE WRONG :)
Could you explain "nothin!!!" A bit more.
To which source is your Sky box assigned?
what about link frequency?
is the rf modulator turned on?
my experience is an rf link amplifier is important for picture quality...?
Stefan